You’ve spent hours dialing in your print settings. The first layer looks perfect. You hit print, walk away, and come back to find… stringing, bubbling, rough surfaces, or worse — a failed print halfway through.
Sound familiar? Here’s the thing most people don’t realize until it’s too late: it’s probably not your printer, your slicer, or your settings. It’s…
If you’ve been in the 3D printing hobby for more than a year or two, you’ve probably noticed something: Bowden setups are quietly losing their grip on the community. And it’s not because direct drive suddenly got popular — it’s because direct drive got good. Really good.
A few years ago, the argument against Direct Drive Extruders was valid: they added mass to the…
Bowden vs Direct Drive: Which Extruder Setup Is Better for 3D Printing in 2026?
So you’re trying to figure out the whole Bowden vs direct drive debate. You’ve probably read a few forum posts, watched a YouTube video or two, and now you’re more confused than when you started. Don’t worry — by the end of this guide, you’ll know exactly which extruder setup is right…
Quick Summary: The Anycubic ACE Pro is a combined 4-spool feeder and active dryer designed for the Kobra 2 series. It’s ideal for multi-color printing and fighting humidity, but has compatibility limits and can struggle with flexible filaments.
If you’re running a Kobra 2 series printer and looking to step up your multi-color game while keeping filament moisture under control, the…