Best 3D Printers Under $300

Looking for a good quality 3D printer but have a small budget? Well, there are dozens of printers that you can go for. Here are our top picks of the best 3D printers under $300.

Best 3D Printer Under $300

3D printers have been around for over 40 years. However, the machines were expensive and largely used by large institutions. In fact, it is only during the last decade or so that 3D printer manufacturers have started producing consumer 3D printers.

Today, 3D printers for home use are becoming more popular. And in the coming years, these devices will just be as essential in a home or office as the conventional 2D printer.

While professional and industrial 3D printers go well into thousands of dollars, there are also reasonably priced printers that anyone on a budget can buy. In this guide, we present the best 3D printers under $300.

  • 1. Creality Ender 3 Pro

Creality Ender 3 Pro


The Creality Ender 3 Pro was one of the best 3D printers under $200 a while ago. However, since then, the price has hiked over the $200 mark. So, why should you buy this 3D printer?

First off, the Ender 3 Pro is packed with some impressive features. These include a magnetically detachable print bed, a tougher Y-axis arrangement, a better extruder, and new bearing wheels to strike the right balance between quality, reliability, and affordability.

Overall, the Ender 3 Pro is ideal for hobbyists and small entrepreneurs who want to increase their 3D printing creativity without spending too much money. The printer is opensource, easy way to hack and can be upgraded in several ways. For instance, you can upgrade it with a BLTouch sensor for automatic bed setting, with various firmware updates, or with various 3D-printed extras.

  • 2. Anycubic i3 Mega

Anycubic i3 Mega


The Anycubic i3 Mega is a Prusa clone that is affordable and easy to assemble. The printer comes with a comprehensive setup manual. Therefore, even if you are a beginner, you won’t have any problems with the setup.

The Anycubic i3 Mega is a super cheap 3D printer with a decent, heated print bed called Ultrabase. The printer also has a good hotend; you will be printing your first models in no time, as long as you have enough PLA filament.

This budget 3D printer is great for 3D printing newbies who want to get hands-on in the assembly and setup of their machines.

  • 5. Tronxy XY-2 Pro

Tronxy XY-2 Pro


Nowadays, some 3D printer manufacturers simply change a few aspects of their printers and then label them as “Pro” or “Plus” version. However, this is not the case with the Tronxy XY-2 Pro. The “Pro” edition is actually significantly different from the previous model.

The Tronxy XY-2 Pro has been completely redesigned and given some new features such as, automatic bed leveling, a print resume function (e.g. after a power failure), a filament sensor detector, and more. For a few more dollars, you can upgrade this 3D printer under 300 dollars with an optional titanium extruder.

  • 6. 7. Giantarm Geeetech A10M

Best 3D Printers Under $300 1


If you are looking for a more advanced printing experience, get the Giantarm Geeetech A10M dual extruder printer. With this printer, you can print two colored filaments at once.

The printer comes 90% pre-assembled. Therefore, there is not a lot you will have to do to set it up. We also love that it has a large printing area that will allow you to print bigger parts.

Another feature of the Geeetech A10M is resume print. With this feature, your projects will be saved in case of a power outage and continue printing from where it left when power resumes.

The Geetech A10M has an opensource control board. Therefore, if you would like the printer to do a lot more, you can customize the board however you want.

Leave a Reply