ABS filaments can be quite tricky to print. While most 3D printers are advertised to be able to handle both PLA and ABS, very few actually do a good job with the later. Which is the best 3D printer for ABS and Nylon materials? Read on.
Most FDM printers can print ABS material. However, the printers really struggle to produce high-quality models from the material.
In fact, if you have a budget 3D printer, you will most likely have to upgrade its heated bed, build or buy an enclosure, and use a good adhesive to successfully print ABS 3D models.
If most of your projects require ABS material, it is best to invest in a 3D printer that can specifically handle the filament.
Below is an overview of the best ABS 3D printers on the market.
Best 3D Printer for ABS and Nylon
| 3D Printer | Print Volume | Closed Box | Filter | Price |
| Flashforge Adventurer 3 | 150 x 150 x 150 mm | Yes | No | CHECK PRICE |
| Tiertime UP mini 2 ES | 120 x 120 x 120 mm | Yes | Yes | CHECK PRICE |
| Dremel DigiLab 3D45 | 254 x 152 x 170 mm | Yes | Yes | CHECK PRICE |
| XYZprinting da Vinci Super | 290 x 290 x 300 mm | Yes | No | CHECK PRICE |
| Zortrax M200 Plus | 200 x 200 x 180 mm | Open top | No, but they sell a HEPA filter as an accessory | CHECK PRICE |
| Tiertime UP300 | 205 x 255 x 225 mm | Yes | Yes | CHECK PRICE |
| Ultimaker 3 | 215 x 215 x 200 mm | Open front | No | CHECK PRICE |
1. Flashforge Adventurer 3
BUY ON AMAZON
The Flashforge Adventurer 3 is an enclosed 3D printer that is quite affordable (check price). This 3D printer is easy to use, sturdy, and has an automatic filament feeding system. Other notable features of the printer include an in-built camera and a removable print bed.
The Flashforge ABS 3D printer has a build volume of 150 x 150 x 150 mm and can print in a resolution of 100 microns.
The Flashforge 3 has a closed-box design. Therefore, its nozzle can heat up to 200°C in just 50 seconds.
The high-temperature nozzle together with the heated print bed make this one of the best ABS 3D printers on the market.
One downside of the Flashforge 3D printer is that it does not have an air filtration system. Therefore, when using it, make sure the area is well-ventilated. You’ll definitely want an air purifier in the room where you’ll be using the printer. Here are some of the best air purifier systems for 3D printers that we recommend.
Other features of the Adventurer 3 include cloud printing, Ethernet, WiFi, and USB.
Read the complete Flashforge Adventurer 3 review.
|
COMPARE PRICES
|
|
| Amazon | |
2. Tiertime UP mini 2 ES
BUY ON AMAZON
The Tiertime UP mini 2 ES is one of the best 3D printers for beginners. This printer is an upgraded version of the UP mini 2 and boast of various safety features that make it excellent for printing ABS filament.
The small printer is easy to operate and has a HEPA filter that absorbs toxic fumes. Other features of the printer include auto bed leveling, touchscreen controls, blackout recovery, and a separate filament caddy to protect filament from air exposure.
The UP mini 2 ES 3D printer has a build volume of 120 x 120 x 120 mm, Ethernet connectively, an upgraded touchscreen and a USB card slot.
The affordable 3D printer for ABS works surprisingly quiet.
|
COMPARE PRICES
|
|
| Amazon | |
3. Dremel DigiLab 3D45
BUY ON AMAZON
The Dremel DigiLab 3D45 also comes in a close-box design. The printer is easy to use, affordable and safe. Therefore, it is suitable for a workshop or a classroom setting.
The DigiLab 3D45 is easy to set up and provides quality prints. However, the print quality is not that good with third-party filaments. We also found it to struggle with Nylon.
This ABS 3D printer has a filter that contains the toxic fumes produced by ABS filament during printing.
Check the full Dremel DigiLab 3D45 review.
|
COMPARE PRICES
|
|
| Amazon | |
4. XYZprinting Da Vinci Pro
BUY ON AMAZON
The XYZPrinting Da Vinci Pro has a print volume of 200 x 200 x 2000mm. The printer is affordable, produces high-quality printers and can handle third party filaments well. This printer is perfect for prosumers and makers looking for large volume 3D printers.
The Da Vinci Pro’s nozzle heats up to 300°C. Therefore, you can be sure that it handles ABS filament well. Other features of the printer include an intelligent quick-release nozzle, a heat-resistant glass printing platform, automatic platform calibration, and power failure recovery.
|
COMPARE PRICES
|
|
| Amazon | |
5. Zortrax M200 Plus
BUY ON 3DPRINTERSONLINESTORE
The Zortrax M200 Plus is an upgrade of the original M200. This printer is sturdy, reliable and produces quality printer. If you want a printer with a large build volume, check out the other Zortrax models, i.e., M300 or M300 Plus.
The M200 Plus has a build volume of 200 x 200 x 180mm and produces high-quality printers. This printer is compatible with third party filaments, has a sleep mode that allows it to save energy, and calibrating the print bed is quite easy.
The Zortrax M200 offers good value for money. The ABS print quality is unmatched, especially when you are using the company’s ABS filaments.
Some of the features of the M200 include built-in camera to record the printing and WiFi connectivity. The printer will also automatically detect when the filament runs out and pause the print job.
If you are wary of the toxic ABS fumes, you can purchase a HEPA filter from the company separately.
|
COMPARE PRICES
|
|
| 3DPrinters Online Store | |
6. Tiertime UP300
BUY ON BHPHOTOVIDEO
The Tiertime UP300 also makes it on our list of the best 3D printers for ABS. This printer is easy to use and produces flawless prints.
The printer has to removable double-sided glass print beds and interchangeable print heads. The machine also has a tall case that surrounds the print volume to protect the ABD prints from uneven temperatures. There is also a HEPA air filter that absorbs the toxic fumes produced by the ABS filament during printing.
The Tiertime UP300 can handle different types of filaments, including PLA and flexibles, by swapping the print heads. Its build volume is 205 x 255 x 225 mm.
This is one of the best professional 3D printers on the market.
|
COMPARE PRICES
|
|
| BH PHOTOVIDEO | |
7. Ultimaker 3
BUY ON TOP3DSHOP
The Ultimaker 3 is a solid 3D printer that can handle professional, multi-material prints. This dual-extruder printer has hot-swappable print cores, NFC-equipped reels and WiFi connectivity, all of which help to simplify the printing process.
The build volume of this printer is 215 x 215 x 299mm. Other features worth noting include the solid structure and heated bed.
However, there are some downsides of this machine that you should be aware of. For example, the printer has an old glass plate release system, poorly positioned spool holders, and an open front.
You can easily fix the open front by covering it or buying an aftermarket solution.
Despite the downsides, the Ultimaker is one of the best 3D printers for ABS.
|
COMPARE PRICES
|
|
| TOP 3D SHOP | |
The above are the best 3D printers for ABS.
