When looking for a good 3D pen for beginners and kids, what you should consider the most is the safety of the pen. The best 3D pens for kids donít heat up a lot. Therefore, their nozzles donít present as a burning hazard.
In this review, we highlight the best 3d pens for beginners (including kids from 8 years old. Some of the t3D pens that need parental monitoring, mainly due to the potential dangers presented by the nozzles. The pens have been organized from the most expensive to the cheapest.
If youíd rather go straight to comparing the prices and the features, click our comprehensive comparison table.
Best 3D Pen for Beginners & Kids
#1: Polyes Q1 3D Pen
The Polyes Q1 3D pen comes in a variety of vibrant colors and uses photopolymer resins as the writing medium. The pen is safe for kids due to the presence of UV light.
The 3D pen features an automatic LED light shut off, which takes effect when the pen is tilted to a specific angle. This is important since curious kids might sometimes want to look at the tip of the pen. It would be dangerous (eye damage) if the UV light was shone on their eyes.
The special photopolymer ink reacts to light in the visible light spectrum (which includes UV) and is heated at very low temperatures. This eliminates the risk of children or beginners getting burned when they accidentally touch the nozzle as it does not get heated.
The warming up of this ink doesnít produce unpleasant smells, something that is a huge concern with ABS or PLA 3D pens. Although you will not be able to print using either ABS or PLA material with this pen, the photopolymer ink makes the pen safe for use by kids. The ink also comes in fun colors for unlimited fun.
- Cordless and, therefore, can be used wirelessly
- Uses the cool ink technology (photopolymer) that comes in a variety of colors (aromatic, glow-in-the-dark, and others)
- No heated nozzle and is, therefore, safe for children
- Has a speed control button
#2: CreoPop 3D Pen
CreoPop 3D Pen has one operation button and uses the ëcool inkí technology (photopolymer) that makes designs solidify fast. This technology uses LED light, which is extruded at the nozzle tip of the 3D pen where the printing ink is ejected from.
The variety of inks that can be used with this pen range from elastic ink, temperature ink, magnetic ink and even glow-in-the-dark ink. The amount of ink in each cartridge can allow for about 5ft of 3D drawing.
Because the pen uses photopolymer material instaed of thermoplastic material, which is used by most pens, it can operate on battery power alone. It does not require a large amount of heat to melt the writing media. This pen can also be used wirelessly.
However, with the CreoPop 3D pen, you will be limited to using resin ink since ABS and PLA cannot be used.
Read the in-depth CreoPop 3D pen review.
RELATED: Best 3D Pens for Experts
- Has a rechargeable battery and a USB port for charging
- Uses photopolymer technology (cool ink) which comes in a variety of colors
- Has a sleek appearance
- Can be used wirelessly
- The nozzle does not heat up to unsafe temperatures. Therefore, it is the best 3D pen for 8 year old artists
- The simplistic design (only one operation button) makes it easy to use.
Best 3D Pen for 8 Year Old
#3: 3Doodler Start – Best 3D Pen for 8 Year Old
The 3Doodler Start pen is specially made for beginners children. This pen uses a specially-developed biodegradable plastic filament that has a lower melting point than ABS or PLA. Therefore, you can touch and mold the molten plastic with your hands without risking any burns. The nozzle is also safe since it doesnít get heated up.
The 3Doodler Start pen is user friendly and has a simplistic design. The 3D pen for beginners has one nozzle temperature setting and one pre-set extrusion speed.
Other features of the pen include an LED indicator that alerts you when the battery is charging and when ready for use, a micro USB port for charging and for plugged in operation, and an on/off switch. A single button is on the body for turning the extruder on or off. Double clicking the button will reverse the extruder.
3Doodler also provides 3D printing stencils. It you need some creativity, check the fun stencil projects on 3Doodler Start. These inspirational ideas can start you off on your 3D printing project. If you need 3Doodler Start for educational use, you can buy the product in bundles.
- Relatively easy to use
- Has one pre-set temperature mode
- Has an LED indicator
- Uses FDM technology (a special low temperature biodegradable filament)
- Is wireless and hence portable
- You can use it either when plugged in an electric source or wirelessly
- Ideal for use by children since the nozzle does not heat up
- Takes a short time to heat up (Up to 1 minute.)
- On/off switch
The AtmosFlare 3D Pen uses a photopolymer resin that is solidified by UV light. The resin’s extrusion is not automated and therefore, you have to squeeze the ink cartridge to eject it to start drawing.
This pen is powered by one AA battery that can last up to four hours of continuous use, has four different nozzles, and two refillable ink cartridges. Although the battery is not rechargeable, it lasts long.
The pen uses UV light. Therefore, you should use a dark surface when doing your printing to avoid reflection of the UV light on a white surface. The rays can be dangerous to the eyes and the reflected UV light may cause ink to clog the nozzle.
- It uses photopolymer technology (cool ink that is solidified by UV light)
- Uses AA batteries which can last for 4 hours on continuous use
- You should guide your children when they are using the pen
- This pen is affordable (check price at Amazon)
Read the full AtmosFlare 3D pen review.
The Tech 4 Kids magic Imagi Pen also makes it on the list of the best 3D pens for beginners and kids. The pen uses liquid polymers, commonly known as ìcool inkî, which hardens immediately when exposed to UV light. However, it takes a while to harden without UV light.
The pen’s nozzle has LED nodes, which almost instantly cure the ink liquid passing through it. This pen also uses 3 AAA batteries instead of the power adapter. It is therefore portable and wonít require your child to use it in a specific location. The pen is safe as the nozzle does not present a burning hazard.
You will, however, have to purchase the batteries separately as they are not included in the 3D pen package.
- Affordable (check price)
- 3 AAA Batteries (can last for 4 hours on continuous use)
- Photopolymer technology
- Parental guidance is still advised for kids because of the UV light
Editor’s Verdict: Best 3D Pen for 8 Year Old Artists and Beginners
The above are the best 3D pens for beginners and kids. The pens are cheap and will provide a great introduction to anyone that is interested in 3D printing. These pens do not heat up excessively and, therefore, are great for children. The pens have an ergonomic design and are easy to use.
Any of the pens above would be great for kids. However, we highly recommend the 3Doodler Start for its performance and ratings by customers.