3Doodler Create Review

3doodler create reviewThe 3Doodler Create 2.0 Pen is an improved version of the original 3Doodler that was unveiled in 2013. The 3Doodler 3D pen founders started a Kickstarter campaign, which raised enough money for the development of the first pen.

While the original version received a lot of criticism, the 3Doodler Create 2.0 has considerable improvements that make it one of the best 3D pens on the market.

In this 3Doodler Create review, weíll look at the features and performance of the 3D pen.

How Does 3Doodler Create 3D Pen Work?

3doodler create reviewThe 3Doodler pens (Start, Create and Pro) resembles the traditional pen but use PLA or ABS filaments to create 3D models. The filament rods get into a pen from one end, are heated and extruded on the other side in molten state. You can then use the molten plastic to draw all kinds of shapes, forms and patterns in the air.

The 3Doodler Create 2.0 has a button on the side for controlling the filament speed. Both 3D printing beginners and experts will enjoy working with this pen.

Unlike the original version, the Create 2.0 version has a slender body, is stronger and lightweight.

Features of 3Doodler Create 3D Pen

  • Slim pen measuring 3 x 11.2 x 5.2 inches
  • Lighter pen. Weighs just 1.8 ounces
  • Heating temperature: 160-230 degree adjustable
  • Stronger than the original
  • The slender pen can easily fit in any hands
  • Has controls for changing the filament speed


Unboxing the 3Doodler Create

The 3Doodler Create 2.0 box has the 3D pen, one nozzle removal tool, one unblocking tool, 50 strands of 3mm filament (25 ABS, 25 PLA), a user guide, a quick start guide, a flat-head mini screwdriver and a power adapter.

3doodler create welcome packThe pen is shipped with 10 different filament colors, each of 5 strands. The filament color selection is decent and includes gray, clear, white, black and vibrant colors. If you want to get more creative, you can purchase the complete 3Doodler refill PLA range that has a total of 65 colors, including sparkly, flexible and glow-in-the dark features.

3Doodler Create 2.0 Design

The original 3Doodler 3D pen had a round, fat bottom but a slim top. Some customers not only found this look awkward but also complained of the penís heavyweight. The first 3Doodler received low rating from reviewers, compelling the manufacturer to improve its design.

The 3Doodler Create 2.0 design has been improved to a sleek, shiny metal look. The 3D pen weighs 1.8 ounces, is much slimmer and looks like the conventional pens. The slimmer body allows a firm grip, enabling you to create and excellent doodles and drawings. A flexible rubbery grip at the tip makes the pen easy to hold.

The 3Doodler Create has also been unveiled with some new accessories. These include a portable battery, a Jetpack, and controls for customizing the filament extrusion speed.

If you want a continuous filament flow, you only have to double-click the trigger. Moreover, thanks to the Jetpack battery, you can use the pen for well over 2 hours continuously. Read this review of 3Doodler accessories for more information.

The 3Doodler 3D pen is available in two colors: black and grey.

3Doodler Create Features Summary

  • Design: The 3D pen features a new nozzle design that produces crispier doodles and performs better. The pen is less noisy, smooth and easy to operate.
  • Speed Control: You can have non-stop doodling sessions with the 3Doodler 2.0 thanks to the new continuous flow function and the dual speed control.
  • Body Improvement: The 3Dooler Create is light, slim but also strong.

Loading the 3Doodler Create Filament

The 3Doodler Create heats up almost instantly when plugged into a power source. The pen has a colored ring at its end that indicates what state it is in.

3doodler create filamentsWhen the pen is heating up, the ring is red. When the pen is ready for use, the ring is either green or blue. When you heat up the 3D pen for the first tip, some light fumes may come off from its tip.

When the 3Doodler 3D pen is hot enough, you can load the filament. Youíll have to push into firmly into the extruder while applying a clockwise twist. If you are using a strand that has been previously used, trim off its uneven end so that it can fit easily and firmly into the extruder.

When the 3Doodler Create plastic filament is loaded, simply press the pen nozzle to the paper and start drawing.

3Doodlerís community page has various stencils that you can choose for your first projects.

3doodler create stencilsIf you are new to 3D pen drawing, you should expect a few failed attempts for your first creations. However, in minutes, you will be using the 3Doodler Create just fine.

The 3Doodler works in a very straightforward manner. Stopping the continuous flow of filament before itís too late can be practice. However, with a little bit of practice, the operation of the pen gets easier and fun.

The 3Doodler Create is compact and unobtrusive. Its nozzle also gets very hot and hence you should not leave to with children below 12 years.


  • Great selection of Projects
  • Simple to operate
  • Sturdy design
  • Easy setup
  • Affordable


    • Must be plugged into a power source
  • Cooling fan is a bit noisy
  • Freehand drawing is less fun than using
  • Removing the filament can be tricky

3Doodler Create Reviews from Customers

Most users are happy with the simplicity of the improved version of 3Doodler printing pen. The 3D pen is user-friendly for both experts and beginners.

The 3Doodler filament speed control feature is one of the reasons that make the 3Doodler Create popular on the market. With this feature, you can draw continuously for up to two hours. This is a great feature if you are making complex 3D models.

Unlike is the case with some 3D printers, there is no software to download nor any preparation needed to start using the 3Doodler. You simply have to feed the PLA filament in the end, turn on the pen and start doodling.

The 3Doodler Create 3D pen is relatively easy to use.


Cons of 3D Doodler Create 2.0

While there are more positive reviews on Amazon for the 3Doodler Create, there are also some cons. Here are the main concerns some users have:

  • It takes some time and a lot of practice to adjust to using the pen. If you have never handled a 3D pen before, there is some learning curve before you can use the pen perfectly. To quickly master how to use the 3Doodler pen, keep the filament extrusion speed to a minimum.
  • The pen heats up to extremely hot degrees to melt the filament. If you are not careful, you can end up burning your fingers. Make sure you donít let children below 12 years play with the 3D pen. Older children can be allowed to use the pen with adult supervision.
  • The pen can be a little difficult to grip if you are handling a 3D pen for the first time

3doodler create reviewThis 3D pen is perfect for both beginners and expert 3D artists. Amateurs can have hours of fun building their imagined creations while expert artists can make more fascinating and lively designs.

The 3Doodler Create is not recommended for children below 12 years of age. If you would like a 3d pen for kids, get the 3Doodler Start.


The 3Doodler Create 2.0 3D pen is the best 3D pen on the market. If you are not getting one for yourself, consider purchasing it as a gift for a friend that loves 3D printing. The pen is affordable and its performance is unrivaled by other 3D pens on the market.

If you are just starting out with using 3D pens, you will find working with project stencils from the official community portal to be more enjoyable than freehand drawing. However, as your confidence grows, you can create more original items.

One thing you should know is that the 3Doodler Create is not fully portable. You have to plug it into a power source when in you. Apart from this, the individual filaments tend to get used up too quickly and will have to be reloaded often if you are undertaking a large project. If you have a large project, make sure you have enough PLA filament on standby.

If you have creative capacity and patience, you will love using the 3Doodler Create 2.0 pen.



Leave a Reply